Brass Furniture Knob with Crystal Ball, Two Screw Lengths, for Cabinet and Drawer

The kitchen is new, but the handles are not

White fronts, clean lines – and yet they are fitted with the same grey standard knobs found in every other kitchen. This knob replaces them with a detail that you actually hold in your hand when opening: a smooth, warm amber-toned sphere on a brass shaft.

What makes the knob stand out in everyday use

• Two screw lengths included, 22 mm and 25 mm (0.87 in and 0.98 in): This ensures the knob fits both thin kitchen fronts and solid drawer panels. No need to buy extra screws from a hardware store because the included one is too short.
• Front mounting through the panel: The screw head is centered in the rosette. You don't need access to the back of the drawer – an advantage for built-in carcasses and closed cabinet walls.
• Round rosette as a contact surface: The disc distributes the pull over a larger area and simultaneously covers drilling marks from previous fittings.
• Spherical shape without edges: The hand grips equally from any direction. No alignment needed, unlike with a pull handle that must be horizontal.
• Solid brass instead of coated zinc: The surface will not rub through to a different base metal at the grip point. Brass develops a patina over time, instead of flaking off unevenly.
• Dimensions 6.5 x 2.5 x 3 cm (2.6 x 1 x 1.2 in): The knob extends 3 cm (1.2 in) from the front – enough to grasp with four fingers without protruding into the walkway.

Suitable for kitchen fronts that need an upgrade without buying new ones, for wardrobes and chests of drawers from furniture stores, for bathroom vanity units, for tenants who want to replace existing handles and restore them when moving out, and for old pieces of furniture with worn-out fittings.

Does the knob fit existing drill holes?

A knob is attached with a single screw and therefore only requires one hole. If pull handles with two drill holes were previously installed, one hole will remain visible – in this case, plug, fill, and paint over, or switch to two-hole handles. Before purchasing, measure the thickness of your front: it should be between 16 mm and 20 mm (0.6 in and 0.8 in) for one of the two screws to fit. To clean, use a dry or slightly damp cloth; do not use abrasive cleaners or acidic cleaners, as they can damage the brass surface.

Your kitchen stays the same – but now you'll reach for something you've chosen yourself every time.