3D Self-Adhesive Wall Cladding in Wood Slat Look made of Waterproof PVC, Roll 40x300 cm (15.7 × 118.1 in) for Living Room and Bedroom

The bare wall behind the bed – without tools, noise, and weekend construction

That moment in the bedroom when the white woodchip wallpaper wall behind the bed looks stark and boring. The rental agreement that prohibits real wood panels with screws in the wall. The renovation you're dreading because it means tools, mess, and a free weekend. This self-adhesive 3D wall covering with a wood slat look solves that with one principle: unroll, peel, stick – and your accent wall is done.

What makes this wall covering different

• Self-adhesive backing without tools – peel off the protective film, press the strip against the wall, smooth it down. No drilling, no screws, no trim to cut. Also suitable for rental apartments where permanent installation is not allowed.
• Realistic 3D wood slat look with depth effect – the contrasting dark gaps between the wood slats create shadow lines that look like real, applied Akupanel slats from a normal room distance – without the thickness and weight of real wood panels.
• Flexible roll construction of 40 × 300 cm (15.7 × 118.1 in) – the flexible strip can be applied over uneven walls, around corners, and along protrusions. Unlike rigid wood panels, it adapts to the wall's shape instead of breaking.
• Water-repellent, scratch-resistant PVC material – unlike real wood, the material does not swell when exposed to moisture. Also suitable for areas with higher humidity, wipeable if soiled.
• Low material thickness of 2.8 mm – the thin design adds hardly any bulk, so sockets, light switches, and door frames still sit flush. No loss of room depth as with thick solid wood slats.
• Versatile for use in any room – as an accent wall behind the bed, behind the sofa, in the hallway, in the home office, or as a TV wall. Multiple strips can be laid next to each other so that the slat pattern runs seamlessly.
• Cuttable with scissors or a utility knife – the strip can be cut to the desired height and around cutouts for sockets, without special tools.
• Immediately ready for use without drying time – no mixing adhesive, no waiting time, no curing. The wall is finished immediately after application.

Who it's for

For tenants who want to upgrade their walls without drilling or screwing. For anyone who wants an accent wall but doesn't have the budget or the weekend for a real wood panel installation. For DIY skeptics looking for a tool-free solution. For home office furnishers who want an attractive video call backdrop behind their desk. For landlords and Airbnb hosts who want to quickly and cost-effectively upgrade rooms. And for anyone who wants a modern, Scandinavian-inspired wood slat look without the hassle of renovation.

Installation in four steps

Before applying, thoroughly clean the wall – the surface must be dust-free, smooth, dry, and grease-free. The adhesive layer will not hold reliably on rough woodchip wallpaper, crumbling plaster, or damp walls; smooth and prime such surfaces beforehand. Measure the required height on the wall and cut the strip with a little overlap. Peel back a piece of the protective film at the top edge, align the strip perpendicularly, and press it down from top to bottom, gradually peeling off more of the film. Use a soft cloth or a squeegee to smooth from the center outwards to remove air bubbles. Join multiple strips together so that the slat lines continue. Cut out openings for sockets and switches with a utility knife. If soiled, wipe with a damp cloth; do not use solvents. Before laying in a cool room, let the roll acclimate briefly so that the material can be smoothed more easily. For the first attempt, it is ideal to start with a small, inconspicuous area to get a feel for pressing and aligning.

For anyone who wants to transform a bare wall into a modern wood slat accent wall – without drilling, without noise, and without weekend construction.